NeoMagicWarrior's Blog
    
NES | SGC | Summer | . | sega

Posted on Oct 23rd 2016 at 12:00:00 PM by (NeoMagicWarrior)
Posted under NES, AV, Nintendo, mod, GBA SP


One of the biggest drawbacks of the NES Model 2, or the "Toploader," is its lack of AV out. Being tethered to coaxial output these days seems almost barbaric, especially since the Model 1 Nintendo has it standard! Thanks to the wonders of the internet, and a neat little circuit board, I fixed that issue in short order.

 As a bonus, I did some repair to my GBA SP, which warrants some attention in case any would be handymen decided to undertake the job themselves.




First, let's talk parts. I bought my NES AV mod board from http://www.retrofixes.com/, and aside from a small shipping error, everything got there pretty safe and sound. The board seemed sturdy, and the soldering was done quite well. It came shipped with a cheap cut of an old IDE cable, which needed to be cut separate. The instructions were housed on the RetroFixes website, and were pretty clear. They glossed over a few parts that may have been easier if I had know what to expect ahead of time.


I picked up a new GBA Shell and screen protector off of some random Chinese seller on Ebay. It came with hinges and was pretty cheap, so I'm not complaining...even if the whole ad was poor in grammar. Besides, it is a Pikachu! Who doesn't think this is the cutest!


Now onto the mods! Step one is disassembling the NES down to the circuit board. You have to solder to two of the chips on the main board and to a resistor for some power. This was WAYYYY more finicky that it sounds.


...it was so finicky that I broke a pin off the video chip! I had to use a rotary tool to grind away some of the chip to expose the metal. This was easily the least fun part of this mod, and assuming you take more time than I did, it shouldn't be a problem.


If you decide to do this mod, your circuit board should look way cleaner than mine. I'm not even sure how I screwed it up this bad. You should really keep your wires clean and neatly wrapped up, unlike this. A big plus for the board is that it screws in place, making it feel much more stable in the case than most mod boards.


Make sure to "measure twice and cut once" when drilling the holes in the case for the AV plugs. I messed up drilling the socket for the red plug, and had to fill it with some plumbers epoxy...then drill a new hole.


I added a power LED mounted underneath the switch, as a means to tell when the power is on. It looks pretty clean overall, and was one of the few parts of the mod I did not totally botch (you can see it in the title picture).


Now onto the GBA SP case mod. I bought my AGS-101 at TooManyGames last year for around 30$. It came with everything except a charger (even the box, which was pretty rad!) and I decided to pick it up despite a few cosmetic issues.


Taking the SP apart was a pretty simple task, especially with the included screw drivers. I HIGHLY recommend following a Youtube guide before doing this yourself, as there are a few hidden screws and a tightly packed ribbon cable.


Other than that awful ribbon cable, the case went on like a dream. It feels just as nice as a OEM case. The screen cover replacement was a bit scarrier, especially with the instructions being, "Pull the old one off." It seemed odd, and was a bit hard to center, but calmer heads prevailed the day I did this mod.

So there you have it! Two mods successfully performed and all sorts of enjoyment ahead. My new Pikachu SP is already turning heads at conventions, and the NES has a clean, crisp picture that I can finally enjoy. Now all I need is some time to actually play some games...although you'll have to wait for the next blog post to hear about that one!

Until then, measure twice...cut once!

~ Neo




Permalink | Comments [3] | Digg This Article |


Recent Entries
The Top 5 Survival Horror Games for the Sega Dreamcast (2/20/2024)
Trombone Champ Is a Good Game (12/30/2023)
Exploring the Infinite Fusion Calculator (12/5/2023)
Thoughts on the Nintendo Switch OLED Model (11/21/2023)
Hypnospace Outlaw (10/30/2023)


Comments
 
AV mods are fun.  I've done a few projects like this in the past; I should be better about documenting them.
 
I was initially worried about counterfeits when I saw this GBA SP shell popping up on Ali Express, but when I saw it installed it was incredibly easy to differentiate between the real and fake versions. Even in your photo, you can tell that the speaker grill is too thin to be an original shell. There's also the more obvious difference in the button color. All buttons on the original are brown, but the repro uses the standard dark gray buttons. There are, however, newer versions of the repro shell with the correct button color, though they haven't thickened the shell and the speaker grill is a dead giveaway.

I've done one shell replacement before to create a custom purple/white combo, and man is it a pain in the butt. It didn't exactly align right when complete, and at RetroWorld Expo this year I picked up another that had its shell replaced already and it had the same misalignment on the hinge. Certainly more difficult to accomplish than the various Game Boy system re-shells.
 
Very cool!  I don't have a top-loader, but I'd definitely want to go this route if/when I pick one up.  Matter of fact, the game shop nearest me has one, if memory serves.  Now I'm tempted...

 Login or register to comment
It appears as though you are not a member of our site, or are not logged in.
It appears as though you can not comment currently. Becoming able to comment though is easy! All you need to do is register for the site! Not only will you be able to access any other site features including the forum and collection tools. If you are a registered user and just need to login then you can do so here.

Comment! It's easy, thoughtful, and who knows you might just enjoy it!
                                                                                                                                                                                                                                               
This is NeoMagicWarrior's Blog.
View Profile | RSS
Blog Navigation
Browse Bloggers | My Blog
Hot Entries
Hot Community Entries
Site content Copyright © rfgeneration.com unless otherwise noted. Oh, and keep it on channel three.